Cable Identification and Tracing System for Power off Cable Testing
Package Size 47.00cm * 38.00cm * 15.00cm Package Gross Weight 7.000kg Cable Identification and Tracing System for Power
Basic Info.
Model NO. | DT-100 |
Mass Scope of Workpiece | <900kg |
Type | Material Testing Machine |
Maxcapacity | <1000KN |
Accuracy Grade | 0.5 |
Load Way | Electronic Load |
Loading Method | Dynamic Load |
Display | Digital Display |
Control | Manual Control |
Weight | 5kg |
Power Source | AC220V |
Oil Cylinder Position | Under |
Configuration | Transmitter and Receiver |
Power Supply | Rechargeable Li-Battery |
Operation Mode | Manual |
Identify Type | Wave Direction, Wave Amplitude |
Shipping Method | by Air |
OEM Service | Available |
Delivery Lead Time | 7 Days |
Language | English |
Pulse Width | 2ms |
Pulse Voltage | 500V |
Onsite Using Time | 3 Hours |
Voltage Range | 0.00V-600V |
Function | Cable Identification, Voltage Test |
Pulse Current | 30A Max |
Features | Accurate, Fast, Simple Operation, Useful |
Transport Package | Packed in Veneer Case. |
Specification | Cable Identification and Tracing System |
Trademark | Delta |
Origin | China Mainland |
HS Code | 9031809090 |
Production Capacity | 100 Sets / Month |
Packaging & Delivery
Package Size 47.00cm * 38.00cm * 15.00cm Package Gross Weight 7.000kgProduct Description
Cable Identification and Tracing System for Power Off Cable TestingIntroduction:
Cable Identification and Tracing System is used to identify a particular cable during power cable laying, transfer, maintenance, and fault location, featured with accurate, fast, simple operation and wide application, light weight, compact structure, and strong anti-interference ability.
Features:
- Color screen, dynamic indication
- Electronic dial, exquisite and intuitive
- Militar Toolbox Design, Pressure Resistance 200 kg
- Pulse current:30A Max
- Pulse voltage:500V
- Pulse width:2ms
- Voltage range:0.00V~600V
- Light weight, easy operation and safe, result is intuitive, no need any experience.
Function | Cable identification, voltage test |
Power | Rechargeable Li-battery:transmitter: 11.1V, receiver 7.4V,working 8h |
Display | Rest voltage display on LCD , receiver 3.5inch, Electronic dial, dynamic grating |
Pulse volt | 500V |
Pulse Am | 30A Max(Depending on the resistance of the loop) |
Pulse Fre | 1time/sec |
Pulse w | Width: 2ms |
Range v | AC 0.00V~600V(50Hz/60Hz) |
resolution | AC 0.01V |
Coil ID | Flexible coil ID:φ200mm |
Length | Crocodile clamp test line 3 meters; test line 1 meter |
Signal | Transmitting signal: dynamic display of bar chart |
cable identification: clockwise dynamic indication of green gratingnon-target cable:counterclockwise dynamic indication of red-orange grating | |
Gain | 6class, press left / right to adjust Gain, |
Size | Transmitter:320mm×275mm×145mm, receiver:207mm×101mm×45mm |
weight | Transmitter:2.5kg, receiver:540g(with flexible coil), total:3.3 kg |
size | LWH: 400mm×245mm×335mm |
Charger | Transmitter:12.6V; receiver:9V |
Anti-volt | Transmitter AC 3700V/rms, receiver: AC 2000V/rms(outer two points) |
configuration | Transmitter 1pcs, receiver 1pcs, flexible 1pcs, bag 1pcs, Crocodile clamp test line 2pcs |
Testing line 2pcs, charger 2pcs, Li-battery 2pcs(within meters), manual operation 1 pcs |
Send to us